$0.82
Holding panels, covers, brackets, and components in place, this Crown #4 screw is a threaded fastener for Crown lift trucks. The #4 size sets the diameter of the screw body, the dimension that has to match the tapped or clearance hole it drives into. As a Crown part, it seats and torques the way the original did.
Crown catalogs this #4 screw as a threaded fastener for its lift trucks, one of the small commodity pieces that hold panels, covers, brackets, and components in place. The #4 size sets the diameter of the screw body, the dimension that has to match the tapped hole or clearance hole it drives into. As a Crown part, it matches the fastener the truck was assembled with, so a replacement seats and torques the way the original did. Match the thread and length to the screw being replaced, since a screw right in diameter but wrong in thread pitch or length will not hold correctly.
| Type | Screw |
|---|---|
| Equipment | Crown |
| Size | #4 |
| Manufacturer Part Number | CR060011-012 |
| Weight (lbs) | 0.01 |
| Length (in) | 0.15 |
| Width (in) | 0.40 |
| Height (in) | 0.5 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR60011-012 |
|---|---|
| Product ID | 15239 |
| Short Link | https://forkliftsetc.net/?p=15239 |
| OEM Number | CR060011-012 |
| Part Number |
|---|
| 220017150 |
| 3039450 |
| 800018101 |
| CR060011-012 |
| CR060011-12 |
| CR60011-012 |
| CR60011-12 |
| HY3039450 |
| YT220017150 |
| TSA-220017150 |
| TSA-3039450 |
| TSA-800018101 |
| TSA-CR060011-012 |
| TSA-CR060011-12 |
| TSA-CR60011-012 |
| TSA-CR60011-12 |
| TSA-HY3039450 |
| TSA-YT220017150 |
