$47.78
Serving as a pivot point and retaining hardware, this Raymond pin holds linkages, levers, and clevis joints together while still letting the parts rotate or hinge where a bolted joint would bind. It replaces the original pin in its assembly and is sized by diameter, length, and the groove or hole for the clip or cotter that captures it.
Pins like this one serve as pivot points and retaining hardware throughout a lift truck, holding linkages, levers, and clevis joints together while still allowing the parts to rotate or hinge where a bolted joint would bind. As a Raymond component, it replaces the original pin in the assembly it came from and does one job: locating and holding the parts it passes through.
Because a pin is sized to its bore and its retaining method, the diameter, length, and the groove or hole for the clip or cotter that captures it are what determine fit. Match those to the pin being replaced so the new one seats fully and stays put under vibration.
| Type | Pin |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1055342-001 |
|---|---|
| Product ID | 15269 |
| Short Link | https://forkliftsetc.net/?p=15269 |
| Part Number |
|---|
| 800135468 |
| RA1055342-001 |
| RA1055342/001 |
| SY99-01459 |
| TY00590-47157-71 |
