$3.21
Bearing a shaft on a smooth, low-friction surface keeps a pivot turning freely instead of grinding, and this Crown Nyliner bearing serves as that surface. A sleeve that rides in the bore, it takes the wear off the shaft on Crown lift trucks, holding the pivot free and the fit intact.
Bearing a shaft on a smooth, low-friction surface is what keeps a pivot turning freely instead of grinding. This Nyliner bearing serves as that surface, a sleeve that rides in the bore and takes the wear off the shaft. A Crown part used on Crown lift trucks. Match the bore, outer diameter, and length to the bushing being replaced.
| Type | Bushing |
|---|---|
| Equipment | Crown lift trucks |
| Manufacturer Part Number | CR103601-001 |
| Weight (lbs) | 0.03 |
| Length (in) | 1.05 |
| Width (in) | 1.05 |
| Height (in) | 1.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR103601-001 |
|---|---|
| Product ID | 15355 |
| Short Link | https://forkliftsetc.net/?p=15355 |
| OEM Number | CR103601-001 |
| Part Number |
|---|
| 800014970 |
| CR103601-001 |
| CR103601-1 |
| SY99-01126 |
| TSA-800014970 |
| TSA-CR103601-001 |
| TSA-CR103601-1 |
| TSA-SY99-01126 |
