$433.33
Reporting position or speed back to the controls, this encoder converts mechanical rotation into an electrical signal the control system reads to know where a shaft sits or how fast it turns. On an electric lift truck it is the feedback element behind precise motor control, steering position, or function sensing, giving the controller the real-time count it needs to run a motor smoothly and hold a commanded position.
Reporting position or speed back to the controls, an encoder converts mechanical rotation into an electrical signal the control system reads to know where a shaft sits or how fast it is turning. On an electric lift truck it is the feedback element behind precise motor control, steering position, or function sensing, giving the controller the real-time count it needs to run a motor smoothly and hold a commanded position.
Because it feeds the control loop directly, an encoder that drifts, skips counts, or fails outright shows up as erratic motion, fault codes, or a function that no longer holds its position. That makes it a part whose failure is felt immediately in how the truck behaves.
Encoders fail from worn bearings, a contaminated or damaged sensing disc, or a broken signal connection. Confirm the encoder's pulse count, its shaft or bore fit, and its connector against the unit being replaced, since encoders that look alike can differ in resolution and electrical output.
| SKU | SBG-3 |
|---|---|
| Product ID | 15360 |
| Category | Electrical, Sensors |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Encoder |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | SBG-3 |
|---|---|
| Product ID | 15360 |
| Short Link | https://forkliftsetc.net/?p=15360 |
| Part Number |
|---|
| SBG-3 |
