$13.75
Raymond builds this roller stud as the fixed shaft a roller turns on, pairing a hardened stud with a sleeve that gives the roller a smooth, wear-resistant surface to ride against. Mounted in a roller assembly, it carries the load and the rotation at a point of constant motion, so the stud and sleeve absorb the wear that would otherwise fall on the roller and its housing.
Raymond builds this roller stud as the fixed shaft a roller turns on, pairing a hardened stud with a sleeve that gives the roller a smooth, wear-resistant surface to ride against. Mounted in a roller assembly, it carries the load and the rotation at a point that sees constant motion, so the stud and sleeve absorb the wear that would otherwise fall on the roller and its housing.
When the sleeve wears or the stud scores, the roller develops play and no longer tracks cleanly, which is the point to replace the part. As an original Raymond component, it matches the diameter and length the roller assembly was built around.
| Type | Sleeve Roller Stud |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1099469 |
|---|---|
| Product ID | 15542 |
| Short Link | https://forkliftsetc.net/?p=15542 |
| Part Number |
|---|
| RA1099469 |
