Cascade Sideshifter Lower Hook 204186 – CE-1002

This sideshifter lower hook is manufactured by Cascade for use with Cascade sideshifter and fork attachment systems, and it has a confirmed two-hole mounting pattern of 11/16 inch diameter holes spaced 2-3/4 inches on center. That precise hole spacing is what lets the hook mate correctly with the matching upper hook or carriage bracket on the attachment.

On a sideshifter, the lower hook is one half of the fork-hanging system, engaging with the fork's upper hook to suspend the fork from the carriage while allowing the sideshifter mechanism to move the forks laterally. Because this hook carries the full weight of the fork and whatever load the fork lifts, the hole pattern and hook geometry need to match the mating hardware exactly; a mismatched hole pattern will not seat correctly and can allow the fork to shift or disengage under load.

At 1.3 pounds, this is a compact bracket-style component consistent with a single lower hook rather than a full fork or carriage. Forklifts Etc. carries this as a direct-fit replacement for Cascade sideshifter systems using the same verified hole pattern.