Crown ITA Class II Fork Pair 1.75 x 4 x 42 in – FORK2-1.75X2X42

Forged from alloy steel to take the repeated bending load a loaded fork carries, this matched pair of ITA Class II forks for Crown lift trucks measures 1.75 inches thick, 4 inches wide, and 42 inches long per blade. The forks are the load-bearing tines that slide under a pallet and lift it, hook-mounted so the upper and lower hooks engage the bars of a standard ITA Class II carriage and lock the blades in place.

Forks are a safety-critical wear item. The heel, where the blade meets the vertical shank, thins gradually as it wears, and a fork with cracks, a visible bend, or a heel worn below its safe thickness is cause to replace the pair rather than keep running it. Forks are always replaced as a matched set so both tines carry the load evenly and the pair stays balanced.

This pair corresponds to Crown fork 094185-023 and fits Crown SC4200 and FC4000 trucks. Forklifts Etc. supplies them as the Class II replacement forks for those models. Confirm the carriage on the truck is ITA Class II, since the hook spacing and mount are what let the forks seat and lock.