$185.71
Clamp attachments hold a load through their pad faces, and this Crown gripper pad presents the friction surface that grips without crushing or scoring what it carries. At roughly 3.2 pounds it is a substantial pad rather than a thin facing, spreading clamp force across a broad contact area so the load stays put through travel and lift on Crown lift trucks.
Grip pads take the wear on a clamp attachment, presenting the friction face that holds a load against the arms without crushing or scoring it, and this one is cataloged for Crown lift trucks. At roughly 3.2 pounds it is a substantial pad rather than a thin facing, sized to spread clamp force across a broad contact area so the load stays put through travel and lift.
The working surface is what degrades in service: repeated clamping glazes and thins the pad, grip falls off, and a load that once held firm begins to slip. Replacing the pad restores the original friction and contact area the clamp was built around. Match the pad footprint and mounting pattern to the arm it comes off, since clamp pads are sized to a specific attachment.
| SKU | CA672712 |
|---|---|
| Product ID | 11812 |
| Category | Attachments |
| Brand | Crown |
| Weight | 3.2 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Gripper Pad |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 3.20 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CA672712 |
|---|---|
| Product ID | 11812 |
| Short Link | https://forkliftsetc.net/?p=11812 |
| Part Number |
|---|
| 800138601 |
| 800143314 |
| ACCC672712 |
| CA672712 |
| CAC672712 |
| HY672712 |
| KOCC672712 |
| NYC672712 |
| SY94196 |
| SY94196PRO |
| SY99-02055 |
