$140.00
Oil reaching the right work port depends on the spool sliding inside the directional valve, and this Crown unit routes flow between pump, work ports, and tank on attachment hydraulics. Machined lands and grooves open and close each path as it shifts, so tilt, sideshift, and clamp answer the operator's lever. Close clearance against the bore holds pressure without internal leakage.
Sliding inside a hydraulic directional valve, this spool routes oil between the pump, the work ports, and tank on Crown lift truck attachment hydraulics. The lands and grooves machined along its length open and close flow paths as the spool shifts, so movements like tilt, sideshift, or clamp respond to the operator's control lever. At about 0.28 pound it is a precision-machined part sized to a specific valve bore.
Spool fit is close by design, since the clearance between spool and bore holds hydraulic pressure without internal leakage; wear or scoring at that interface shows up as slow or drifting attachment functions. Match the spool to the valve body it serves, since spool land pattern and diameter are specific to the bore it rides in.
| SKU | CA673089 |
|---|---|
| Product ID | 11474 |
| Category | Attachments |
| Brand | Crown |
| Weight | 0.28 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Spool Assembly |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.28 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CA673089 |
|---|---|
| Product ID | 11474 |
| Short Link | https://forkliftsetc.net/?p=11474 |
| Part Number |
|---|
| 800065536 |
| CA673089 |
| CAC673089 |
