$74.90
Seal kit for rebuilding the lift cylinder on Cascade, Crown lift trucks, supplying the rod seal, piston seal, wiper, and o-rings to reseal one cylinder. As seals harden and wear, the cylinder weeps oil, drifts under load, or loses lift; resealing restores full pressure and is the economical alternative to a new cylinder.
Seals in a hydraulic lift cylinder harden and weep with age, and this Cascade seal kit, manufacturer part 560349, restores the sealing package inside the lift cylinder on Cascade sideshifters and comparable carriage attachments. It gathers the wear seals, wipers, and O-rings the cylinder needs into a single rebuild kit, so a leaking cylinder can be resealed rather than replaced whole.
The kit serves the lift function of the attachment, where the cylinder raises, lowers, or positions the load-handling section, and it covers Cascade equipment running on Crown lift trucks among others. Rebuilding with a matched seal set returns full hydraulic pressure and stops the drift and external leakage that come from a tired seal, which is the usual reason a cylinder is pulled for service.
Because a seal kit is cut to one cylinder size, match the kit to the bore of the cylinder being rebuilt before installing, since kits that look alike differ by seal diameter and cross section. Installed correctly, the Cascade 560349 kit returns the lift cylinder to sealed, full-pressure operation.
