$1.29
A zerk-style Raymond grease fitting that provides the entry point for grease during routine lubrication service on Raymond equipment. It measures 0.2 by 1 by 0.2 inches. As the access point for scheduled greasing, this fitting keeps routine lubrication of Raymond equipment straightforward wherever the original zerk is fitted.
Routine lubrication depends on a good grease fitting, and this Raymond zerk provides the threaded entry point where a grease gun couples to the component and forces fresh grease into the bearing or pivot. A spring-loaded check ball inside the fitting lets grease in under pressure and then seals against backflow, keeping packed grease in the joint and dirt out.
Compact at roughly 0.2 by 1 by 0.2 inches and weighing about 0.15 pounds, it threads into a grease port on Raymond equipment. A fitting that is clogged, stripped, or leaking past the check ball keeps a grease gun from seating or holding pressure, so replacing a bad zerk restores clean, reliable lubrication service. Match the thread size and the fitting angle, straight or angled, to the port it threads into.
| Type | Grease fitting |
|---|---|
| Equipment | Raymond |
| Manufacturer Part Number | RA840-018 |
| Weight (lbs) | 0.15 |
| Length (in) | 0.20 |
| Width (in) | 1.00 |
| Height (in) | 0.2 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA840-018 |
|---|---|
| Product ID | 11210 |
| Short Link | https://forkliftsetc.net/?p=11210 |
| OEM Number | RA840-018 |
| Part Number |
|---|
| BT840018 |
| GD2160003 |
| JL2160003 |
| RA840-018 |
| TC76053259 |
| TC76601080 |
| TY00590-00018 |
| TY00590-00018-71 |
| TY005900001871 |
