$19.08
This shim fits Raymond equipment and weighs 0.4 pounds, used to fine-tune clearance or alignment between mating components on the truck. Shims are added or removed during assembly or service to correct spacing without replacing the larger parts around them. As a Raymond-specified part, it is intended for shops adjusting fit at whatever assembly point on the truck called for this shim.
Precise clearance and alignment come down to shims, and this Raymond shim is a thin, flat spacer inserted into an assembly on Raymond equipment to take up gap, set preload, or square one component to another. Adding or removing shim material is how a technician dials in the small dimensional adjustments that bearings, mounts, and mating parts require to run true.
Because a shim sets a working clearance, using the wrong thickness changes how tightly parts fit and can leave a joint too loose or bound too tight. This one weighs about 0.4 pounds. Match the shim's thickness and its inner and outer dimensions to the original in the stack being serviced, since the exact thickness is what determines the clearance it sets.
| Type | Shim |
|---|---|
| Equipment | Raymond |
| Manufacturer Part Number | RA828-005-209-015 |
| Weight (lbs) | 0.40 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HW-1385 |
|---|---|
| Product ID | 14130 |
| Short Link | https://forkliftsetc.net/?p=14130 |
| OEM Number | RA828-005-209-015 |
| Part Number |
|---|
| CTNA017554 |
| ET22955 |
| HW-1385 |
| LP790-2909 |
| MBNA017554 |
| RA828-005-209-015 |
| RA828-005-209/015 |
| RA828-006-867-015 |
| RA828-006-867/015 |
| SY78554 |
| UKNA017554 |
