$2.93
Raymond shim that takes up clearance and sets the correct gap or alignment within a chassis assembly during service on Raymond lift trucks. As a thin spacer installed to the exact thickness a given fit calls for, it is carried as a distinct part rather than a generic washer, holding the clearance the assembly was originally set to.
A Raymond shim for Raymond lift trucks, a thin spacer used to take up clearance and set the correct gap or alignment in a chassis assembly during service. Shims like this are installed in the exact thickness a given fit calls for, which is why they are carried as a distinct part rather than a generic washer.
Cataloged under Raymond's part reference, it replaces the shim in its original position. Match the thickness to the shim coming out to hold the clearance the assembly was set to.
| Type | Shim |
|---|---|
| Equipment | Raymond |
| Manufacturer Part Number | RA850-401 |
| Weight (lbs) | 0.10 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HW-2071 |
|---|---|
| Product ID | 11890 |
| Short Link | https://forkliftsetc.net/?p=11890 |
| OEM Number | RA850-401 |
| Part Number |
|---|
| 3007314 |
| 800057741 |
| HW-2071 |
| HY3007314 |
| LP790-2986 |
| RA850-401 |
| RADS232345 |
| SY99-00718 |
| TY00590-48810-71 |
| TY005904881071 |
