$6.57
Seating in a machined groove under its own spring tension, this Raymond snap ring holds a bearing, gear, or shaft component in its axial position on Raymond lift trucks, doing the job of a machined shoulder without one. Snap rings lose retaining force once they have been over-spread or distorted, and a weakened ring can let the part it holds walk out of position.
Seating in a machined groove under its own spring tension, this Raymond snap ring holds a bearing, gear, or shaft component in its axial position on Raymond lift trucks. The ring's spring force is what keeps it locked in the groove against the thrust the retained part puts on it, doing the job of a machined shoulder without one. Snap rings are removed and reused during service but lose retaining force once they have been over-spread or distorted, and a weakened ring can let the part it holds walk out of position. Match the ring to the groove diameter and the shaft or bore it retains on the unit being serviced, since snap rings are sized closely to their groove and a loose or oversize ring will not hold.
| Type | Ring, Snap |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.25 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA223-001-569/C21 |
|---|---|
| Product ID | 12395 |
| Short Link | https://forkliftsetc.net/?p=12395 |
| Part Number |
|---|
| RA223-001-569/C21 |
