$0.83
Sized to a 20.3 mm bore, 31 mm outside diameter, and 1.6 mm thickness, this Raymond flat washer spreads a fastener's clamping load across a wider face and protects the surface under the bolt or nut head. The bore sets the fastener it fits over, while the outside diameter gives the bearing surface that keeps the head from digging in or pulling through.
Sized to 20.3 mm inside diameter, 31 mm outside diameter, and 1.6 mm thick, this Raymond washer spreads a fastener's clamping load across a wider face and protects the surface under the bolt or nut head. The 20.3 mm bore sets the fastener it fits over, while the 31 mm outside diameter gives the bearing surface that keeps the head from digging in or pulling through.
A flat washer of the right dimensions is what keeps a joint's clamp load even and its surface intact. This is a Raymond part matched to the fastener position it was cataloged to serve. Confirm the bore against the fastener diameter, since a washer has to clear the bolt while still covering enough surface to spread the load.
| Type | Washer |
|---|---|
| Equipment | Raymond |
| Size | 20.3 mm ID x 31 mm OD x 1.6 mm |
| Manufacturer Part Number | RA771-137 |
| Weight (lbs) | 0.25 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA771-137 |
|---|---|
| Product ID | 12333 |
| Short Link | https://forkliftsetc.net/?p=12333 |
| OEM Number | RA771-137 |
| Part Number |
|---|
| 220017631 |
| 220034544 |
| 3014625 |
| 3037920 |
| 800058228 |
| 800059212 |
| BRPM771-137 |
| BT771-137 |
| FT9272338 |
| HY3014625 |
| LIF9272338 |
| NIPM771-137 |
| PM771-137 |
| RA771-137 |
| SL9272338 |
| SY99-02541 |
| UKPM771-137 |
| YT220017631 |
| YT220034544 |
| 0B3328 |
| 771-137 |
| 9272338 |
| 99-02541 |
| B3328 |
