$270.51
Raymond builds this riser as an OEM structural component that raises or spaces a mounted assembly to its correct working height inside the truck. It sets the vertical position of the part it carries, holding it at the offset the design calls for so mating components align and clear one another, and it is dimensioned to drop into its original location without modification.
Built by Raymond as an OEM structural piece, this riser sets the vertical position of the assembly mounted to it, holding that assembly at the offset the design calls for so mating components align and clear one another. It spaces a mounted part up to its correct working height within the truck and carries that part's load down into the surface beneath.
As a factory part, it is dimensioned to drop into its original location without modification. Its whole function is dimensional: the height it establishes and the hole pattern it bolts through both have to be right for the assembly above it to sit correctly.
Because a riser is specific to the assembly it positions, confirm the mounting hole pattern and overall height against the riser being replaced before installing, since a riser of the wrong height carries everything above it out of alignment.
| Type | Riser |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1143029/004 |
|---|---|
| Product ID | 14709 |
| Short Link | https://forkliftsetc.net/?p=14709 |
| Part Number |
|---|
| RA1143029-004 |
| RA1143029/004 |
| TY00590-49595-71 |
