$34.94
Raymond's rear link shaft is the pivot and connecting pin within the rear linkage of its electric lift trucks, the chassis part the surrounding links rotate on and transfer motion through. It carries bearing load and repeated motion, so its surface wears where the links ride, and a worn or scored shaft introduces play into the linkage. Fitting a fresh shaft restores a tight, true pivot through the rear links.
Raymond makes this rear link shaft to serve as the pivot and connecting pin within the rear linkage of its electric lift trucks, a chassis part that the surrounding links rotate on and transfer motion through. Running about 10 inches along its longest dimension and weighing just over a pound, it is sized to span the linkage it ties together.
A link shaft carries both bearing load and repeated motion, so its surface wears where the links ride on it, and a worn or scored shaft introduces play into the linkage it anchors. Fitting a fresh shaft restores a tight, true pivot through the rear links. This Raymond rear link shaft matches the original for a direct replacement on the Raymond lift truck. When installing, match the shaft diameter and length to the linkage it seats in so the links ride true on the new pin.
| Type | Shaft |
|---|---|
| Equipment | Raymond lift trucks |
| Manufacturer Part Number | RA1050893-001 |
| Weight (lbs) | 1.05 |
| Length (in) | 1.00 |
| Width (in) | 10.00 |
| Height (in) | 4.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | E-8812 |
|---|---|
| Product ID | 15078 |
| Short Link | https://forkliftsetc.net/?p=15078 |
| OEM Number | RA1050893-001 |
| Part Number |
|---|
| 800135466 |
| E-8812 |
| LP758-1501 |
| RA1050893-001 |
| RA1050893/001 |
| SY92162 |
