$53.17
This carbon brush set conducts current to the rotating commutator of Crown electric motors, four brushes riding under spring pressure to maintain the electrical connection that feeds the spinning armature. As a designed wear item, the carbon shortens with use, and falling pressure and contact area bring intermittent power, arcing, or sparking. Supplied as a set of four, it renews every contact point for Crown drive or pump motor service.
This carbon brush set is built for Crown electric motors, sold as a set of four brushes that conduct current to the motor's rotating commutator. Carbon brushes ride against the commutator under spring pressure, maintaining the electrical connection that lets current flow into the rotating armature as the motor spins.
Because the brushes are in constant sliding contact with the commutator, they are a designed wear item, gradually shortening as the carbon material wears away with use. As a brush wears down, spring pressure and contact area both decrease, and the motor can start to show intermittent power, arcing, or sparking at the commutator as the connection becomes less consistent. Left unreplaced, worn brushes can also accelerate wear on the commutator itself, turning a simple brush change into a more involved repair.
This set is sized for Crown drive or pump motor applications and comes as a complete set of four so all contact points on the motor are renewed at the same time. Forklifts Etc. stocks this set as a direct fit for Crown electric motor service.
| SKU | RA570-252/517 |
|---|---|
| Product ID | 11040 |
| OEM Number | RA570-252/517 |
| Category | Carbon Brushes, Electric Motors, Electrical |
| Brand | Crown |
| Weight | 0.5 lbs |
| Dimensions | 2" L × 2" W × 2" H |
| Type | Carbon brush set |
|---|---|
| Quantity | 4 brushes per set (1=Set of 4) |
| Fitment | Crown electric motor (drive or pump) |
| Function | Conducts current to the rotating commutator |
| Weight (lbs) | 0.50 |
| Length (in) | 2.00 |
| Width (in) | 2.00 |
| Height (in) | 2.0 |
