$9.45
This Hyster bearing retainer holds a bearing securely in its housing to keep it aligned under running load, preventing the bearing from shifting axially as the truck operates. That axial location is what lets the bearing carry radial and thrust loads consistently instead of working loose over time. A small precision component of about 0.05 pounds, it fits Hyster and Raymond lift trucks that shared this drivetrain part.
This bearing retainer is manufactured by Hyster and fits Hyster and Raymond lift trucks, holding a bearing securely in its housing to keep it aligned under running load. A retainer of this kind prevents the bearing from shifting axially as the truck operates, which is what allows the bearing itself to carry radial and thrust loads consistently instead of working loose over time.
Measuring roughly 1 inch by 1 inch by half an inch and weighing about 0.05 pounds, this is a small precision component sized to match a specific bearing bore rather than a general-purpose fastener. Because retainers see the same vibration and heat cycling as the bearing they hold, wear typically shows up as a loosened fit or a retainer that no longer seats fully, which lets the bearing walk out of position and accelerates wear on the surrounding components.
The shared Hyster and Raymond fitment reflects a drivetrain component that carried over between the two equipment lines. Ordering by the manufacturer part number ensures the retainer matches the bearing bore and housing dimensions on the truck it is going into.
