$8.62
Raymond bushing that lines a bore in the chassis to give a shaft or pin a smooth bearing surface, taking the wear that would otherwise fall on the housing so it can be replaced on its own as a pivot or mount wears in. Pressed into its original bore on Raymond lift trucks, a worn one is a likely cause when a linkage or pivot develops play.
A bushing for a Raymond lift truck chassis, cataloged under Raymond's own part reference. It lines a bore to give a shaft or pin a smooth bearing surface and takes the wear that would otherwise fall on the housing, so it can be replaced on its own as a pivot or mount wears in.
It presses into its original bore as a direct replacement. When a linkage or pivot develops play, a worn bushing is a likely cause. Confirm the bore and shaft size against the bushing being replaced before installing.
| Type | Bushing |
|---|---|
| Equipment | Raymond |
| Manufacturer Part Number | RA313063-000 |
| Weight (lbs) | 0.15 |
| Length (in) | 0.15 |
| Width (in) | 1.15 |
| Height (in) | 0.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA313063-000 |
|---|---|
| Product ID | 11911 |
| Short Link | https://forkliftsetc.net/?p=11911 |
| OEM Number | RA313063-000 |
| Part Number |
|---|
| 800151560 |
| BT313063-000 |
| PM313063-000 |
| RA313063-000 |
| TY313063-000 |
