$45.84
This shaft installs within the upright on Crown lift trucks, serving as the fixed axle on which a mast roller or sheave turns as the carriage raises and lowers. It carries the rotating component and transfers its load into the mast structure, holding alignment through repeated lift cycles. Machined to Crown's specified diameter and length, a straight, unworn shaft keeps its mounted component running true.
Within the upright of a Crown lift truck, this shaft provides the fixed axle on which a mast roller or sheave turns as the carriage raises and lowers. It carries the rotating component and transfers its load into the mast structure, holding position and alignment through repeated lift cycles.
Machined to the diameter and length Crown specifies, the shaft resists the bending and shear loads that develop when the mast works under a full load. A straight, unworn shaft keeps its mounted roller or sheave running true against the mast channel; one that is worn or bent lets the component cock or bind, which accelerates wear on the roller and the rail it rides. Fitting a correct replacement restores true rotation and clean carriage travel.
Confirm the shaft diameter and length against your Crown mast before fitting, since the roller or sheave and its bearings have to seat on the correct size to run true.
| Type | Shaft |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 1.45 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR143842 |
|---|---|
| Product ID | 12471 |
| Short Link | https://forkliftsetc.net/?p=12471 |
| Part Number |
|---|
| CR143842 |
