$235.85
Lets the steer knuckle turn on the axle, this king pin kit is built by Raymond for its lift trucks, supplying the steering pivot pin along with the bushings, seals, and hardware that renew the joint as a set. The pin carries the steering load and forms the pivot; as it wears, steering goes loose and wandering and tires wear unevenly.
A worn steering pivot brings loose, wandering steering, and this king pin kit rebuilds that joint on a Raymond lift truck as a complete set. The king pin carries the steering load and forms the pivot the steer knuckle turns on, and the kit supplies the pin together with the bushings, seals, and hardware that mate to it, so the pivot is renewed all at once rather than piecemeal.
The pin wears at its bearing surfaces over time, developing play that shows up as loose or wandering steering and uneven tire wear. Replacing the full kit takes up that slack and restores a tight steer pivot.
When ordering, match the kit to the truck's steer axle, since king pin diameter and length vary across models and the pin has to fit both the knuckle bore and the axle.
| Type | King Pin Kit |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 4.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA2996083CE |
|---|---|
| Product ID | 10945 |
| Short Link | https://forkliftsetc.net/?p=10945 |
| Part Number |
|---|
| RA2996083CE |
