$349.14
This Tennant 14-inch polypropylene disk brush scrubs efficiently across most soils and surfaces on the Tennant T20 rider scrubber, and also fits the M20 and M30 models. The poly filament costs less than nylon while delivering reliable scrubbing action, though it is not recommended for high-temperature debris. As a consumable, the brush is replaced once its bristles wear down and splay past effective floor contact.
Sized at 14 inches, this polypropylene disk scrub brush drives against the floor on the Tennant T20 rider scrubber and also fits the M20 and M30 machines. The poly filament cuts through most general soils across common floor surfaces and runs more economically than nylon, with the one limit that it is not suited to high-temperature debris.
A scrub brush is a consumable by design. Its bristles wear shorter and splay outward with every pass until the brush no longer reaches the floor with enough bite to scrub cleanly, and at that point it is swapped to bring the machine back to full scrubbing action. Running a brush past that point loses cleaning performance and puts uneven load on the deck drive.
Match the brush diameter and the deck drive-hub pattern to the machine so it seats and spins true. Forklifts Etc. carries it as the Tennant polypropylene disk brush for the T20, M20, and M30 scrubbers.
| SKU | TN1220185 |
|---|---|
| Product ID | 14874 |
| Category | Sweepers & Scrubbers |
| Brand | Tennant |
| Weight | 15.65 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Brush 14" 3 SR Poly |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | TN1220185 |
|---|---|
| Product ID | 14874 |
| Short Link | https://forkliftsetc.net/?p=14874 |
| Part Number |
|---|
| TN1220185 |
