$55.75
This Thombert load wheel assembly arrives complete, with its 6307 bearing already pressed into the hub and ready to mount. The wheel measures 6 inches in outside diameter and 2.75 inches wide, cut from Dyalon A polyurethane that carries heavy load without the chunking a rubber wheel shows. The greasable bearing can be relubricated in service. Thombert documents fitment on Clark, Crown, and Raymond lift trucks.
This Thombert load wheel assembly arrives complete, with its 6307 bearing already pressed into the hub, ready to mount in place of a worn unit without a separate bearing installation. The wheel measures 6 inches in outside diameter and 2.75 inches wide, cut from Thombert's Dyalon A polyurethane, with a 3.149 inch bore sized to the axle.
Because the bearing is a greasable type, the assembly can be relubricated in service to extend its working life rather than being run to failure and discarded, which suits it to a maintenance program that greases wheels on a schedule. The Dyalon A polyurethane tread carries heavy rolling and static load without the chunking and flat-spotting that shorten the life of a rubber wheel under the same point loading. Thombert documents the assembly as fitting Clark, Crown, and Raymond lift trucks, covering load-wheel positions across all three fleets.
Even on a complete assembly, the bore has to match the axle for the wheel to seat. Match the 3.149 inch bore to the axle diameter on the truck, since a press-fit wheel will not seat on a shaft cut for a different bore. Forklifts Etc. sells it as a single ready-to-install unit.
