$5.63
Setting the correct position of a wheel on its axle, this Raymond spacer establishes the spacing and alignment that keeps the wheel located where the design intends, filling a defined gap so bearings sit square and the wheel tracks true. As a machined part it carries load through its faces with no moving parts, and its whole function is holding a set width the wheel and bearings depend on.
Setting the correct position of a wheel on its axle, this Raymond spacer establishes the spacing and alignment that keeps the wheel located where the design intends. It fills a defined gap along the axle or hub, positioning the wheel laterally so bearings sit square, the wheel tracks true, and adjacent components clear.
As a machined spacer it carries load through its faces and has no moving parts; its entire function is dimensional accuracy, holding a set width that the wheel and bearings depend on. Get that width wrong and the wheel sits out of position.
Spacers are usually replaced when damaged, worn on a face, or when a bearing or wheel service calls for a fresh set to restore correct endplay. Confirm the spacer's inner diameter, outer diameter, and thickness against the one being removed, since spacer thickness sets wheel position and a substitute of the wrong width will misalign the wheel.
| SKU | RA1098738/07 |
|---|---|
| Product ID | 12309 |
| Category | Lift Linkage, Tires & Wheels |
| Brand | Raymond |
| Weight | 1.5 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Spacer, Wheel |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 1.50 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1098738/07 |
|---|---|
| Product ID | 12309 |
| Short Link | https://forkliftsetc.net/?p=12309 |
| Part Number |
|---|
| RA1098738-07 |
| RA1098738/07 |
