$350.00
This right-hand tension bar provides structural tension support on the right side of the linkage system on Crown lift trucks, part of the lift linkage that carries load rather than moving as a wear part. It is a substantial member at 29.5 pounds, sized for a structural role in the linkage. It serves as a direct replacement for the original right-hand tension bar on Crown lift trucks.
Carrying tension load on the right side of the lift linkage, this right-hand tension bar is a structural member that holds two points of the linkage in fixed relationship as the mast and carriage move under load. It weighs about 29.5 pounds and is built to resist the pulling forces that run through the linkage during a lift cycle without stretching or bending.
Because it works in tension, its failure modes are elongation, cracking, and wear at the end connections, any of which lets the linkage geometry shift and puts uneven load on the parts around it. A tension bar that shows cracking, wear at the pivot holes, or distortion should be replaced to keep the linkage moving true.
This is the right-hand part specifically, so it is handed to one side of the linkage; match it to the side and the pivot spacing of the bar coming off, since the left-hand and right-hand versions are not interchangeable.
| SKU | CR1252378-079 |
|---|---|
| Product ID | 11004 |
| Category | Lift Linkage, Tires & Wheels |
| Brand | Crown |
| Weight | 29.5 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Tension Bar Rh |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 29.50 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR1252378-079 |
|---|---|
| Product ID | 11004 |
| Short Link | https://forkliftsetc.net/?p=11004 |
| Part Number |
|---|
| CR1252378-079 |
