$120.12
This axle is built for Crown lift trucks, measuring 3.9 inches long with a 1 by 1.5 inch cross-section, sized for a load wheel application. It provides the fixed shaft that a load wheel rotates around, transferring the weight of the truck and its load down through the wheel assembly to the ground.
Measuring 3.9 inches long with a 1 by 1.5 inch cross-section, this axle is sized for a load wheel application on Crown lift trucks. It provides the fixed shaft that a load wheel rotates around, transferring the weight of the truck and its load down through the wheel assembly to the ground.
An axle in this position carries continuous radial load as the wheel turns, and over time the shaft surface can wear at the bearing or bushing contact points, introducing play into the wheel assembly. That wear shows up as looseness, uneven wheel rotation, or increased vibration at the load wheel, and left unaddressed it accelerates wear on the bearing or bushing riding on the axle.
At just under 4 inches, it is a routine replacement part for shops servicing worn load wheel assemblies. Match the shaft diameter and length to the axle being replaced, since the bearing or bushing must seat correctly on the journal to run true.
| SKU | CR150544 |
|---|---|
| Product ID | 11150 |
| Category | Load Wheels, Tires & Wheels |
| Brand | Crown |
| Weight | 1.65 lbs |
| Dimensions | 3.9" L × 1" W × 1.5" H |
| Type | Axle |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 1.65 |
| Length (in) | 3.90 |
| Width (in) | 1.00 |
| Height (in) | 1.5 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR150544 |
|---|---|
| Product ID | 11150 |
| Short Link | https://forkliftsetc.net/?p=11150 |
| Part Number |
|---|
| CR150544 |
