Thombert Dyalon A Load Wheel Assembly 5 x 2.88 x 2.047 – 4817AOA

Thombert builds this 5 inch load wheel assembly on Dyalon A polyurethane, the compound that gives a lift truck wheel its resistance to cutting, chunking, and the load fatigue that breaks down softer rubber under repeated cornering and heavy pallets. The 5 inch outside diameter and 2.88 inch tread width set the footprint that carries the load, while the 2.047 inch bore governs the press fit onto the axle and is the dimension that has to match for the wheel to seat correctly.

It arrives as a complete assembly with 6205 bearings pressed into the hub, so the wheel mounts as a unit rather than sending the buyer to source and press bearings separately. The 6205 bearing is a greasable type, which lets a maintenance shop re-lubricate on a service interval instead of scrapping the wheel when the bearing dries out.

Thombert documents this wheel fitting Allis Chalmers, Clark, Crown, Hyster, Linde/Baker, MCFA, Raymond, and Yale lift trucks, making it a broad-coverage replacement across a mixed fleet. Match the 2.047 inch bore to the axle diameter, since a press-fit wheel will not seat on a shaft cut to a different size.