Thombert Dyalon A Load Wheel Assembly 5 x 3.63 x 2.44 – ST-4807 AOA

Thombert Dyalon A Load Wheel Assembly 5 x 3.63 x 2.44 – ST-4807 AOA

PID: 15352

$56.88

This polyurethane load wheel assembly measures 5.00 inches outside diameter, 4.12 inches wide, with a 2.440 inch bore, supplied with bearings pressed into the hub. The wide tread belongs to the load-carrying position rather than a drive or steer wheel.

Thombert Dyalon A Load Wheel Assembly 5 x 3.63 x 2.44 – ST-4807 AOA

This Thombert load wheel assembly pairs a 5 inch Dyalon A polyurethane tread with a wider 3.63 inch face, a combination built to spread heavier loads across more contact area while the polyurethane resists the cutting and chunking that wears a rubber wheel down. The 2.44 inch bore is the mounting dimension, sized for a press fit onto the axle it was cataloged to run on.

The wheel comes complete with 6305 bearings pressed into the hub, a larger bearing series suited to the higher load this wider wheel is meant to carry. The 6305 set is greasable, so the bearing can be serviced in place rather than driving an early wheel replacement.

Thombert documents this wheel fitting Allis Chalmers, Crown, MCFA, Raymond, and Toyota lift trucks, covering reach and counterbalanced applications across several major brands. Match the 2.44 inch bore to the axle diameter before installation, since bore governs whether a press-fit wheel seats square and runs true.

SKU ST-4807 AOA
Product ID 15352
Category ,
Brand
Weight 9.25 lbs
Dimensions 5" L × 3.63" W × 5" H
Thombert Dyalon A Load Wheel Assembly 5 x 3.63 x 2.44 – ST-4807 AOA
Specifications
Part Type Load Wheel Assembly
Manufacturer Thombert
Compound Dyalon A polyurethane
Outside Diameter 5 in
Width 3.63 in
Bore 2.44 in
Bore Depth 0.667 in
Configuration Bearings pressed in (assembly)
Bearing 6305
Bearing Type Greasable
Sold As Each
Weight (lbs) 9.25
Length (in) 5.00
Width (in) 3.63
Height (in) 5.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number ST-4807 AOA
Product ID 15352
Short Link https://forkliftsetc.net/?p=15352
Cross-Reference Part Numbers
Part Number
00590-53453-71
00590-53455-71
1050237
1055548
1201770
1201771
310160
314325-000
6305
632-052
749306145
971757
97H3504800
NA012714
PM306
RA206
RY654
S654
ST-4807AOA

Related Items: