Thombert Load Wheel 3.25 x 5.91 x 2.047 – ML-4862

Thombert produces this polyurethane load wheel at a 3.25 inch outside diameter with a wide 5.91 inch tread, the extra width spreading load across a larger contact area for equipment that runs heavy or long duty cycles. The 2.047 inch bore sets the press fit onto the axle and is the first dimension to confirm against the shaft. Polyurethane tread wears slower and chunks less than rubber under the constant reversing that load wheels see in service.

The bore is cut for the 6205 bearing series standard at this size, with bearing installation set to the application.

This wheel carries documented multi-brand coverage in Thombert's cross-reference table, fitting Crown, Hyster, MCFA, Raymond, Toyota, and Yale lift trucks. That breadth makes it a common service wheel across a mixed fleet. Because the bore governs whether the wheel presses on and turns true, measure the axle and match it to the 2.047 inch bore before installation.