Thombert Load Wheel 3.25 x 5.91 x 2.047 – ST-4862

Thombert molds this polyurethane load wheel to a 3.25 inch outside diameter and a wide 5.91 inch tread face, riding on a 2.047 inch bore that governs how the wheel seats onto its axle. A load wheel carries the weight at the forks under a reach or pallet truck, and Thombert's polyurethane gives it the compressive load capacity and abrasion resistance to hold up under that concentrated weight on hard floors without flattening or chunking.

The wheel is bored for a 6205 bearing of the greasable type, so the bearing can be serviced in place rather than run to failure. Thombert's OEM cross-reference documents this load wheel fitting Crown, Hyster, MCFA, Raymond, Toyota, and Yale equipment, which makes it a common service part across a mixed electric fleet.

Bore is the dimension that has to match: a press-fit load wheel will not seat on an axle of the wrong diameter, so match the 2.047 inch bore and the 6205 bearing to the axle and bearing already on the truck before installing. Forklifts Etc. carries this Thombert load wheel as a direct replacement for the worn wheel in place.