Thombert Load Wheel 3.25 x 6.5 x 2.047 – ML-2261

Thombert builds this polyurethane load wheel to a 3.25 inch outside diameter, a 6.5 inch width, and a 2.047 inch bore, the dimension that sets how the wheel presses onto its axle. Polyurethane is the compound Thombert relies on for load wheels because it carries heavy static and rolling loads without the chunking or flat-spotting that softer tread develops under a loaded lift truck.

The 2.047 inch bore is sized to seat a 6205 bearing, and the greasable bearing design lets a shop relubricate the wheel in service instead of pulling it early. Thombert documents this wheel as a fit for Clark, Crown, MCFA, and Raymond lift trucks, so a single part covers load wheel replacement across a broad slice of a mixed fleet.

Because the bore governs the press fit, match the 2.047 inch bore and the bearing seat to the axle on the wheel coming off, since a load wheel seats correctly only when its bore fits the shaft it rides on. Forklifts Etc. supplies it as a Thombert load wheel ready to press in place of the worn original.