Thombert Load Wheel 5 x 2.88 x 2.047 – ST-4817

Thombert makes this polyurethane load wheel at 5 inches in outside diameter and 2.88 inches wide on a 2.047 inch bore, sized for the 6205 bearing series. The polyurethane tread carries the sustained static and rolling loads a load wheel sees under a lift or pallet truck, resisting abrasion and chunking while rolling quieter and easier on the floor than a steel wheel of the same size, which is what keeps a load wheel in service through a hard duty cycle.

Thombert's cross-reference table documents this wheel fitting a wide range of material handling equipment, including Allis Chalmers, Clark, Crown, Hyster, Linde and Baker, MCFA, Raymond, and Yale, which makes it a broad-coverage load wheel for a mixed fleet. The bore is the dimension to match before installing: measure the bearing seat or axle the wheel presses onto against the 2.047 inch bore, and confirm the 6205 bearing size, since a press-fit wheel bored for the wrong shaft will not seat and hold under load.