Thombert Load Wheel 5 x 4.12 x 2.44 for Crown – ST-2267

Thombert Load Wheel 5 x 4.12 x 2.44 for Crown – ST-2267

PID: 14099

$44.99

Thombert builds this load wheel to 5.00 inches outside diameter, 4.12 inches wide, with a 2.440 inch bore, supplied as the wheel alone. The wide tread relative to diameter puts it in the load-carrying position where spreading weight across more contact surface matters.

Thombert Load Wheel 5 x 4.12 x 2.44 for Crown – ST-2267

Thombert makes this polyurethane load wheel at 5 inches in outside diameter and 4.12 inches wide on a 2.44 inch bore, a wide-tread load wheel for the load stations on stand-up and reach trucks. The polyurethane compound carries heavy static and rolling loads with strong abrasion resistance, rolling quieter and easier on warehouse floors than a steel or cast wheel while resisting the chunking and flat-spotting that shortens the life of a softer tread. It is supplied wheel only, without bearings, so the shop presses in or reuses the 6305 bearings the hub is bored to accept.

Thombert's cross-reference table documents this wheel fitting Crown lift trucks, including the reach-truck load stations that run this 5 by 4.12 size. The bore is the fit-critical dimension on a press-fit wheel: measure the bearing seat or axle the wheel mounts on and match it to the 2.44 inch bore, since a wheel bored oversized will not seat and hold on the shaft.

SKU ST-2267
Product ID 14099
Category ,
Brand
Weight 11.2 lbs
Dimensions 5" L × 4.12" W × 5" H
Thombert Load Wheel 5 x 4.12 x 2.44 for Crown – ST-2267
Specifications
Part Type Load Wheel
Manufacturer Thombert
Construction Polyurethane tread
Outside Diameter 5 in
Width 4.12 in
Bore 2.44 in
Bore Depth 0.826 in
Bearing 6305
Bearing Type Greasable
Sold As Each
Weight (lbs) 11.20
Length (in) 5.00
Width (in) 4.12
Height (in) 5.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number ST-2267
Product ID 14099
Short Link https://forkliftsetc.net/?p=14099
Cross-Reference Part Numbers
Part Number
115033
CR327
CR9153
S9153
S9157
ST-2267

Related Items: