Thombert Load Wheel Assembly 3.25 x 5.98 x 2.047 – 2539AOA

Dyalon A polyurethane carries this Thombert load wheel assembly, machined to a 3.25 inch outside diameter over a wide 5.98 inch tread with a 2.047 inch bore. The broad 5.98 inch width spreads the load across a larger contact patch, which is why this profile shows up under heavier drive and load positions, while the Dyalon A compound gives the tread the resilience and cut resistance to hold up under sustained rated weight. The 3.25 inch diameter sets the ride height the truck was built around, and the 2.047 inch bore controls the press fit onto the axle.

This wheel comes as a complete assembly with a 6205 bearing already pressed into the hub. The 6205 is a greasable bearing, so it accepts periodic lubrication in service rather than running sealed for life, which suits an operator who maintains wheels on a schedule. Thombert documents this wheel to fit Unicarriers lift trucks at this hub and bore.

Match the 2.047 inch bore and the 6205 bearing seat to the axle on the truck before pressing the wheel on, since a press-fit wheel seats correctly only when the bore matches the shaft.