Thombert Load Wheel Assembly 3.25 x 6 x 2.047 – 3849AOA

Dyalon A polyurethane defines this Thombert load wheel, built as a complete assembly with the bearings pressed into the hub. The wheel measures 3.25 inches in outside diameter and a full 6 inches wide, riding on a 2.047 inch bore that fixes the press fit onto the axle. That wide tread spreads a heavy load across a long contact patch, which helps the wheel resist flat-spotting and holds its profile against the chunking that wears a softer compound out of round.

A 6205 bearing carries the hub, matched to the wheel's bore and duty. Documented fitment covers Crown and Raymond lift trucks along with BT/Prime Mover and Linde/Baker equipment, so a shop running a mixed fleet stocks one wheel for several brands.

Bore is the controlling dimension on a press-fit wheel, so match the 2.047 inch bore to the axle diameter before pressing the wheel on; an axle off that size will not let the wheel seat true. Thombert builds the wheel and the assembly as a unit, keeping the hub and bearing matched from the factory.