Thombert Load Wheel Assembly 5 x 3.63 x 2.44 – 4807AOA

Molded in Dyalon A, Thombert's polyurethane load-wheel compound, this wheel arrives as a complete assembly with its bearings pressed into the hub. It stands 5 inches in outside diameter and 3.63 inches wide, with a 2.44 inch bore that sets the press fit onto the axle. Dyalon A gives a load wheel high load capacity and low rolling resistance while resisting the chunking and heat build-up that break down a lesser compound under a full shift.

A 6305 bearing carries the assembly, and the greasable design lets a technician re-lubricate the wheel on a maintenance interval instead of pulling it early. Documented fitment covers Allis Chalmers, Crown, Raymond, and Toyota lift trucks along with MCFA equipment, making it a practical single stock number across a mixed fleet.

Bore is the controlling dimension on a press-fit wheel, so match the 2.44 inch bore to the axle before pressing it on; a shaft even slightly off size will not let the wheel seat square. Thombert manufactures the wheel and the assembly together, so the bearing bore and hub are matched from the factory.