Thombert Load Wheel Assembly 6 x 3.63 x 2.44 – 4838AOA

Thombert supplies this load wheel as a complete assembly, a Dyalon A polyurethane wheel with its bearings already pressed into the hub, built to a 6 inch outside diameter, a 3.63 inch width, and a 2.44 inch bore. Arriving assembled means the wheel bolts in as one unit with no separate press step, and the 6305 bearings it carries are greasable, taking service grease in place rather than running sealed for life. Dyalon A is Thombert's polyurethane wheel compound, which gives the load wheel the load capacity and flat-spot resistance a lift truck demands where the wheel sits parked under weight and then rolls slowly beneath it.

This assembly fits Crown, Hyster, MCFA, Raymond, and Toyota lift trucks, a documented fitment set that makes it a broad-coverage service part for a mixed fleet. Load wheels carry the full load through a small contact patch and wear on a predictable cycle; buying the wheel as a bearinged assembly turns the replacement into a bolt-on job rather than a press-and-fit one.

Match the 2.44 inch bore to the axle before installing, since a press-fit assembly seats only on the shaft it was sized for, and confirm the bearing bore matches the axle so the pressed-in 6305 bearings run true.