$85.58
Molded in Dyalon A polyurethane, this Thombert load wheel arrives as a complete assembly with the bearings pressed into the hub, built to a 6 inch outside diameter. Dyalon A carries heavy loads at low rolling resistance and resists the chunking and heat that wear down a softer wheel. Documented fitment spans Crown, Hyster, and Unicarriers lift trucks plus Allis Chalmers, Big Joe, and Linde/Baker equipment.
Molded in Dyalon A polyurethane, this Thombert load wheel comes as a complete assembly with the bearings pressed into the hub. It measures 6 inches in outside diameter and 3 inches wide, riding on a 2.047 inch bore that governs the press fit onto the axle. Dyalon A carries heavy loads at low rolling resistance and resists the chunking and heat that wear down a softer wheel over a hard shift.
The assembly runs on an 87505 bearing set, a greasable design that lets a shop re-lubricate the wheel in service rather than replace it at the first sign of drag. Documented fitment spans Crown, Hyster, and Unicarriers lift trucks along with Allis Chalmers, Big Joe, and Linde/Baker equipment, making one wheel useful across a wide, mixed fleet.
Bore is the deciding dimension on a press-fit wheel, so match the 2.047 inch bore to the axle before pressing it on; an axle off that size will not let the wheel seat true. Forklifts Etc. supplies this Thombert assembly as a direct replacement for a worn 6 inch load wheel.
| SKU | 3600 AOA |
|---|---|
| Product ID | 12308 |
| Category | Load Wheels, Tires & Wheels |
| Brand | Crown |
| Weight | 13.25 lbs |
| Dimensions | 6" L × 3" W × 6" H |
| Part Type | Load Wheel Assembly |
|---|---|
| Manufacturer | Thombert |
| Compound | Dyalon A polyurethane |
| Outside Diameter | 6 in |
| Width | 3 in |
| Bore | 2.047 in |
| Bore Depth | 0.594 in |
| Configuration | Bearings pressed in (assembly) |
| Bearing | 87505 |
| Bearing Type | Greasable |
| Sold As | Each |
| Weight (lbs) | 13.25 |
| Length (in) | 6.00 |
| Width (in) | 3.00 |
| Height (in) | 6.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | 3600 AOA |
|---|---|
| Product ID | 12308 |
| Short Link | https://forkliftsetc.net/?p=12308 |
| Part Number |
|---|
| 1033557 |
| 1151016 |
| 310132 |
| 43382-FS400 |
| 501324 |
| 74932910 |
| 800059 |
| AC101 |
| C33557 |
| HY467 |
| LS312 |
| S2358 |
| S467 |
| S560 |
| S999 |
| W3-6G |
| TSA-CR115033-401-THO-MIL3600-AOA |
