Thombert Poly Load Wheel 3.25 x 2.88 x 2.047 – 1113 AO

Dyalon A polyurethane gives this Thombert load wheel the load rating and abrasion resistance a lift truck demands from a small-diameter wheel that turns fast under a full load. It runs 3.25 inches in outside diameter and 2.88 inches wide, with a 2.047 inch bore that determines the press fit onto the axle. At this compact size the wheel spins at higher rpm than a large drive wheel, so the polyurethane compound matters for heat and wear resistance.

The wheel is supplied on its own without bearings, so a technician installs new 6205 bearings or transfers serviceable ones from the wheel coming off. Its 2.047 inch bore is sized to accept the 6205 bearing this wheel is built around. Documented fitment spans Allis Chalmers, Crown, MCFA, Raymond, Toyota, and Yale lift trucks, per Thombert's OEM cross-reference for the part.

Because it presses onto the axle, match the 2.047 inch bore to the shaft it mounts on; a press-fit wheel will not seat on an undersized axle or slide onto an oversized one. Forklifts Etc. supplies it as a like-for-like polyurethane replacement at the cataloged dimensions.