Thombert Poly Load Wheel 3.25 x 2 x 2.047 – 4868 AO

Thombert casts this compact load wheel in Dyalon A polyurethane at a 3.25 inch outside diameter, 2 inches wide, on a 2.047 inch bore that governs the press fit onto the axle. The small diameter and narrow tread suit the load-roller and support-wheel positions on electric pallet trucks and reach equipment, where the wheel turns constantly under a concentrated load. Dyalon A polyurethane gives this size the load rating and abrasion resistance to survive that duty without the flat-spotting a softer wheel develops when it sits loaded.

This is the wheel only, without bearings, so the installer presses in new bearings or reuses the current set. The 2.047 inch bore seats a 6205 series bearing, the size to source before installation. Thombert documents the wheel across a wide fitment, covering Crown, Hyster, Lansing, Linde/Baker, MCFA, Raymond, and Yale material handling equipment.

Match the 2.047 inch bore to the axle before pressing the wheel on, since a press-fit wheel needs the correct shaft diameter to seat and hold. Verify the bearing series against the hub, because a shared bore does not guarantee the same bearing width.