Thombert Poly Load Wheel 3.25 x 4.19 x 2.047 – 4867 AO

Molded from Dyalon A polyurethane, this Thombert load wheel measures 3.25 inches in outside diameter with a 4.19 inch face and a 2.047 inch bore. Thombert is the maker, and Dyalon A is its polyurethane compound, chosen for the abrasion resistance and load-carrying strength a load wheel needs under the concentrated weight of a lift truck. The wide 4.19 inch tread spreads that load across the floor, while the 2.047 inch bore sets the press fit onto the axle.

It comes as a wheel only, so no bearings are pressed into the hub; the buyer supplies or reuses bearings, and the bore is sized to accept a 6205 bearing. Thombert documents fitment across Crown, MCFA, and Raymond electric lift trucks, so one wheel covers several makes in a mixed fleet.

Because a load wheel is a press-fit part, match the 2.047 inch bore to the axle it seats on, since a wheel bored oversize will not hold its press and one bored undersize will not seat. Match the bearing series your hub uses as well, since a wheel-only part leaves that choice to you.