Thombert Poly Load Wheel 4 x 3.62 x 2.047 – 4804 AO

Thombert Poly Load Wheel 4 x 3.62 x 2.047 – 4804 AO

PID: 15368

$50.06

Supplied as the wheel alone, this polyurethane load wheel measures 4.00 inches outside diameter, 3.62 inches wide, with a 2.047 inch bore. The tread is nearly as wide as the wheel is tall, spreading load across a broad contact patch.

Thombert Poly Load Wheel 4 x 3.62 x 2.047 – 4804 AO

Dyalon A polyurethane gives this Thombert load wheel the load rating and abrasion resistance a lift truck needs from a small-diameter wheel that turns fast under a full load. It runs 4 inches in outside diameter and 3.62 inches wide, with a 2.047 inch bore that sets the press fit onto the axle. The polyurethane tread carries heavy static and rolling loads without the flat-spotting a softer rubber wheel develops when a truck sits loaded.

It is supplied as a wheel only, so a technician presses in new 6205 bearings or reuses serviceable ones rather than buying a set already installed. The 2.047 inch bore is machined to seat the 6205 bearing this wheel is built around. Documented fitment covers Crown, MCFA, and Raymond lift trucks, from Thombert's OEM cross-reference for this wheel.

Match the 2.047 inch bore to the axle before pressing the wheel on, since a press-fit wheel will not seat on an undersized shaft or accept an oversized one. Forklifts Etc. supplies it as a direct polyurethane replacement for a worn 4 by 3.62 load wheel of the same bore.

SKU 4804 AO
Product ID 15368
Category ,
Brand
Weight 4.87 lbs
Dimensions 4" L × 3.62" W × 4" H
Thombert Poly Load Wheel 4 x 3.62 x 2.047 – 4804 AO
Specifications
Part Type Load Wheel
Manufacturer Thombert
Compound Dyalon A polyurethane
Outside Diameter 4 in
Width 3.62 in
Bore 2.047 in
Bore Depth 0.59 in
Configuration Wheel only, no bearings
Bearing 6205
Sold As Each
Weight (lbs) 4.87
Length (in) 4.00
Width (in) 3.62
Height (in) 4.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 4804 AO
Product ID 15368
Short Link https://forkliftsetc.net/?p=15368
Cross-Reference Part Numbers
Part Number
1049911
1055550
1201767
1201768
310158
51378796
632-032
97H3503700
NA012711
RA208
RY645
S645
4804AO

Related Items: