Thombert Poly Load Wheel 5 x 2.88 x 2.047 – 4817 AO

Thombert Poly Load Wheel 5 x 2.88 x 2.047 – 4817 AO

PID: 11848

$42.75

Supplied as the wheel alone without bearings, this polyurethane load wheel measures 5.00 inches outside diameter, 2.88 inches wide, with a 2.047 inch bore. That configuration suits equipment where the bearing hardware from the wheel being replaced is serviceable and carried over.

Thombert Poly Load Wheel 5 x 2.88 x 2.047 – 4817 AO

Thombert turns this load wheel from Dyalon A polyurethane, a 5.00 inch outside diameter on a 2.88 inch tread width, with the tread compound chosen to carry a lift truck's load without the flat-spotting and chunking that ends a softer wheel early. The 2.047 inch bore is sized to seat a 6205 bearing, the reference a shop needs when pairing bearings to the wheel.

It is supplied as the wheel only, without bearings pressed in, so a technician fits new 6205 bearings or transfers the existing set from the wheel coming off. That documented fitment is broad: Thombert lists this wheel for Allis Chalmers, Clark, Crown, Hyster, Linde, Baker, MCFA, Raymond, and Yale equipment, which makes it a common replacement across a mixed warehouse fleet.

Since the wheel is a press fit, match the 2.047 inch bore to the axle diameter and the 6205 bearing bore before installation, because a wheel cut for a different shaft will not seat and hold true under load.

SKU 4817 AO
Product ID 11848
Category ,
Brand
Weight 8.15 lbs
Dimensions 5" L × 2.88" W × 5" H
Thombert Poly Load Wheel 5 x 2.88 x 2.047 – 4817 AO
Specifications
Part Type Load Wheel
Manufacturer Thombert
Compound Dyalon A polyurethane
Outside Diameter 5 in
Width 2.88 in
Bore 2.047 in
Bore Depth 0.59 in
Configuration Wheel only, no bearings
Bearing 6205
Bearing Type Greasable
Sold As Each
Weight (lbs) 8.15
Length (in) 5.00
Width (in) 2.88
Height (in) 5.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 4817 AO
Product ID 11848
Short Link https://forkliftsetc.net/?p=11848
Cross-Reference Part Numbers
Part Number
1050132
1055553
1179213
1196604
1201769
1803792
2305605
230711
3005984
3012947
3056852
310164
4879331
5044497-31
5067885-01
5067885-03
5067885-2
580022366
632-043
74826270
74826279
74879331
985189
C33735
NA012713
RA202
RY653
S2402
S451
S552
S653
S857
S976
TSA-CR115033010-MIL4817-AO

Related Items: