Thombert Poly Load Wheel 5 x 3.63 x 2.44 – 4807 AO

Thombert Poly Load Wheel 5 x 3.63 x 2.44 – 4807 AO

PID: 11016

$48.90

Supplied as the wheel alone without bearings, this polyurethane load wheel measures 5.00 inches outside diameter, 3.63 inches wide, with a 2.440 inch bore. The narrower tread fits load wheel brackets machined to that tighter dimension rather than the wider brackets common on many reach trucks.

Thombert Poly Load Wheel 5 x 3.63 x 2.44 – 4807 AO

Thombert casts this load wheel in Dyalon A polyurethane at a 5 inch outside diameter with a 3.63 inch tread, a mid-size wheel that balances load capacity against a footprint that fits a wide range of wheel pockets. The 2.44 inch bore is the press-fit dimension that seats the wheel on the axle, so it is the first number to match. Dyalon A polyurethane holds its profile under sustained weight and rolls cleaner and quieter than rubber across finished floors.

Supplied as the wheel only, it comes without bearings, so new or serviceable bearings are pressed in during the swap. The bore is sized for the 6305 bearing series suited to this diameter.

Thombert documents this wheel fitting Allis Chalmers, Crown, MCFA, Raymond, and Toyota lift trucks in its cross-reference table, a broad range that makes it a frequent service wheel across mixed fleets. Because a press-fit wheel seats correctly only on a shaft cut to its bore, verify the axle measures to the 2.44 inch bore and choose the bearing that matches your hub before installation.

SKU 4807 AO
Product ID 11016
Category ,
Brand
Weight 9.25 lbs
Dimensions 5" L × 3.63" W × 5" H
Thombert Poly Load Wheel 5 x 3.63 x 2.44 – 4807 AO
Specifications
Part Type Load Wheel
Manufacturer Thombert
Compound Dyalon A polyurethane
Outside Diameter 5 in
Width 3.63 in
Bore 2.44 in
Bore Depth 0.667 in
Configuration Wheel only, no bearings
Bearing 6305
Bearing Type Greasable
Sold As Each
Weight (lbs) 9.25
Length (in) 5.00
Width (in) 3.63
Height (in) 5.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 4807 AO
Product ID 11016
Short Link https://forkliftsetc.net/?p=11016
Cross-Reference Part Numbers
Part Number
00590-53453-71
00590-53455-71
1050237
1055548
1201770
1201771
310160
314325-000
632-052
749306145
971757
97H3504800
NA012714
PM306
RA206
RY654
S654
TSA-CR115033/030-THO-MIL4807-AO

Related Items: