Thombert Poly Load Wheel 6 x 2.75 x 3.149 – 2215 AO

Thombert builds this polyurethane load wheel in its Dyalon A compound, measuring 6 inches in outside diameter, 2.75 inches wide, with a 3.149 inch bore that seats the wheel onto the axle. The Dyalon A polyurethane tread carries heavy static and rolling loads without the chunking and flat-spotting that break down softer rubber, which is why it holds up under the repeated point loading a lift truck load wheel absorbs every shift.

This is the wheel-only configuration, so it arrives without bearings pressed in, letting the buyer install new bearings or reuse serviceable ones from the wheel coming off. The wheel is sized around the 6307 bearing, and on the matching assembly that bearing runs as a greasable unit. Thombert documents this wheel as fitting Clark, Crown, and Raymond lift trucks, so it covers load-wheel positions across those three fleets from a single part.

Because a load wheel presses onto its axle, the bore is the dimension that governs whether it seats correctly. Match the 3.149 inch bore to the axle diameter on the truck, since a press-fit wheel will not seat on a shaft cut for a different bore. Forklifts Etc. lists this as an individual wheel for straightforward one-for-one replacement of a worn unit.