Thombert Poly Load Wheel 6 x 3.63 x 2.44 – 4838 AO

Thombert Poly Load Wheel 6 x 3.63 x 2.44 – 4838 AO

PID: 12258

$78.54

Thombert builds this load wheel to 6.00 inches outside diameter, 3.63 inches wide, with a 2.440 inch bore, supplied as the wheel alone in the AO configuration. That suits a rebuild where the existing bearing hardware is still serviceable and being reused.

Thombert Poly Load Wheel 6 x 3.63 x 2.44 – 4838 AO

Thombert molds this load wheel from Dyalon A polyurethane, sized at 6 inches in outside diameter and 3.63 inches wide, running on a 2.44 inch bore that sets the press fit onto the axle. The polyurethane tread carries heavy static and rolling loads without the flat-spotting a softer rubber wheel takes on when a truck sits loaded, and the compound resists the chunking that comes from curb strikes and hard cornering.

It is supplied as a wheel only, so a technician presses in fresh bearings or reuses serviceable ones rather than buying a set already installed. The 2.44 inch bore is machined to seat a 6305 bearing, the size this wheel is built around. Documented fitment covers Crown, Hyster, MCFA, Raymond, and Toyota lift trucks, drawn from Thombert's OEM cross-reference for this wheel.

Bore diameter governs whether the wheel seats, so match the 2.44 inch bore to the axle before pressing it on; an undersized shaft will not hold the wheel and an oversized one will not accept it. Forklifts Etc. supplies this as a direct polyurethane replacement for a worn 6 by 3.63 load wheel of the same bore.

SKU 4838 AO
Product ID 12258
Category ,
Brand
Weight 16.18 lbs
Dimensions 6" L × 3.63" W × 6" H
Thombert Poly Load Wheel 6 x 3.63 x 2.44 – 4838 AO
Specifications
Part Type Load Wheel
Manufacturer Thombert
Compound Dyalon A polyurethane
Outside Diameter 6 in
Width 3.63 in
Bore 2.44 in
Bore Depth 0.665 in
Configuration Wheel only, no bearings
Bearing 6305
Bearing Type Greasable
Sold As Each
Weight (lbs) 16.18
Length (in) 6.00
Width (in) 3.63
Height (in) 6.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 4838 AO
Product ID 12258
Short Link https://forkliftsetc.net/?p=12258
Cross-Reference Part Numbers
Part Number
00590-02818-71
00590-46028-71
00590-47134-71
00590-52906-71
1036603
1201778
1201779
1204733
310172
632-156
NA063009
NA12754
RA325
RY673
S674
TSA-CR315033-0014838-AO

Related Items: