Thombert Poly Load Wheel 7 x 2.75 x 1.98 – 2575 AO

Thombert molds this load wheel from Dyalon A polyurethane, a 7 inch outside diameter wheel 2.75 inches wide running on a 1.98 inch bore that sets the press fit onto the axle. The 7 inch diameter rolls loads with less rolling resistance than a small wheel, and the Dyalon A compound carries the static load without the flat-spotting a rubber wheel develops when a truck sits loaded.

It is supplied as a wheel only, so a technician installs fresh bearings or reuses serviceable ones. The bore is machined for an L44643/L44610 tapered roller bearing set, which handles combined radial and thrust loads better than a straight ball bearing at this wheel position. Documented fitment covers BT/Prime Mover, Crown, Raymond, and Toyota lift trucks, per Thombert's OEM cross-reference for the wheel.

Match the 1.98 inch bore to the axle before pressing the wheel on, since a press-fit wheel will not seat on an undersized shaft. Because this wheel takes a tapered bearing set rather than a ball bearing, match the bearing series to the axle and hub as well. Forklifts Etc. supplies it as a polyurethane replacement at the cataloged 7 by 2.75 dimensions.