Thombert Press-On Drive Tire 12 x 5 x 9 – 10334-SUP

Thombert Press-On Drive Tire 12 x 5 x 9 – 10334-SUP

PID: 11847

$207.96

Press-on polyurethane forklift tire, 12 x 5 x 9 in (outside diameter x width x inside diameter), for Crown electric lift trucks. It presses onto the wheel band with a steel mounting ring and runs with the low rolling resistance, non-marking contact, and long wear that make poly the standard tire for clean indoor electric-truck work. It is a drive-axle tire built to put traction and load to the floor.

Thombert Press-On Drive Tire 12 x 5 x 9 – 10334-SUP

Thombert builds this polyurethane press-on drive tire to a 12 inch outside diameter, 5 inches wide, on a 9 inch mounting bore that sets the interference fit onto the drive wheel. Mounted at the drive axle, this tire puts the truck's tractive effort to the floor, so its polyurethane tread is bonded to a steel press-on band to carry the torque and load without slipping on the band or chunking under repeated starts and stops.

The smooth tread runs clean on finished indoor floors, and at 20 pounds the tire is sized for the drive position on a mid-range electric truck. It seats by hydraulic press, driving the band onto the wheel under interference so the two turn as one with no fasteners. This Thombert drive tire is documented to fit BT and Prime Mover, Crown, MCFA, Raymond, and Unicarriers lift trucks.

Match the mounting bore to the drive wheel diameter before pressing the tire on, since a press-on tire holds only by interference and will not stay seated on a wheel cut to a different size. Forklifts Etc. carries this Thombert drive tire as a direct replacement for the worn press-on it takes off.

SKU 10334-SUP
Product ID 11847
Category , ,
Brand
Weight 20.5 lbs
Dimensions 12" L × 5" W × 12" H
Thombert Press-On Drive Tire 12 x 5 x 9 – 10334-SUP
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Construction Polyurethane tread
Outside Diameter 12 in
Width 5 in
Bore 9 in
Sold As Each
Weight (lbs) 20.50
Length (in) 12.00
Width (in) 5.00
Height (in) 12.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10334-SUP
Product ID 11847
Short Link https://forkliftsetc.net/?p=11847
Cross-Reference Part Numbers
Part Number
1050143
310029
312208
632-104
TO-187PUS
10334-SUP

Related Items: