Thombert Press-On Poly Tire 13.5 x 4.49 x 10.236 – 10169-B2

Thombert Press-On Poly Tire 13.5 x 4.49 x 10.236 – 10169-B2

PID: 11130

$420.00

Press-on polyurethane forklift tire, 13.5 x 4.48 x 10.236 in (outside diameter x width x inside diameter), for Crown electric lift trucks. It presses onto the wheel band with a steel mounting ring and runs with the low rolling resistance, non-marking contact, and long wear that make poly the standard tire for clean indoor electric-truck work. Confirm the tread pattern and compound for your floor before ordering.

Thombert Press-On Poly Tire 13.5 x 4.49 x 10.236 – 10169-B2

Thombert presses a Dyalon B polyurethane tread onto a steel band to build this press-on tire, sized at 13.5 inches in outside diameter, 4.49 inches wide, with a 10.236 inch inside mounting diameter. Dyalon B is Thombert's polyurethane compound, run here as a solid tire that carries load and resists abrasion across a working shift without the flat risk of a pneumatic. The 10.236 inch inside diameter is the mounting figure that governs the interference fit, and at roughly 25 pounds the tire is sized for a mid-capacity electric truck.

Thombert documents fitment on Jungheinrich lift trucks, so it drops onto that make as a cataloged size. The smooth tread and solid polyurethane build suit the hard, flat floors these trucks run on indoors.

Seat the tire with a hydraulic press, since the interference fit between the band and the wheel is what holds it in service. Match the 10.236 inch inside diameter to the wheel it presses onto before installation, because a press-on tire cut to one bore will not seat on a band of another.

SKU 10169-B2
Product ID 11130
Category , ,
Brand
Weight 25 lbs
Dimensions 13.5" L × 4.49" W × 13.5" H
Thombert Press-On Poly Tire 13.5 x 4.49 x 10.236 – 10169-B2
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Compound Dyalon B polyurethane
Outside Diameter 13.5 in
Width 4.49 in
Bore 10.236 in
Configuration Wheel only, no bearings
Sold As Each
Weight (lbs) 25.00
Length (in) 13.50
Width (in) 4.49
Height (in) 13.5
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10169-B2
Product ID 11130
Short Link https://forkliftsetc.net/?p=11130
Cross-Reference Part Numbers
Part Number
51061889
10169-B2

Related Items: